Phone:
+86-133-0613-1202
Product Description
Lubmat 5101 additive package was designed for group II mineral base oil. The air compressor oil blended with Lubmat 5101 solution can provide excellent protection and performance for compressors running with oil maintenance intervals of 4,000 hours and up to 6,000 hours under certain conditions.
Key Performance Benefits
Long oil life – Maintenance saving
Resist formation of carbon deposits in sliding vane slots in vane compressors.
Resist formation of deposits on rotating components in screw compressors.
Resist thermal breakdown and deposit formation to maintain excellent internal surface cleanliness particularly in oil/air separator and coalescer systems.
The exact oil maintenance interval will depend on intake air quality, duty cycle and ambient conditions. For hot and humid type climates as found in the Asian and Pacific regions, the lower oil drain period of 4,000hrs is recommended (also consult OEM recommendations)
Outstanding wear protection
Provide effective protection of internal metal surfaces from corrosion and wear.
Prolong the life of critical parts such as bearings and gears.
Maintaining system efficiency
Provide rapid air release without excessive foaming to give trouble-free operation even under cycling conditions.
Has right water separation properties to help ensure continuous efficient operation of the compressor even in the presence of water.
Recommended Treat Rate
Application-Oil Specification | Dosage（wt%）(1) | Base Oil (2) |
Rotary screw air compressor (L-DAJ) | 2.45% | Group II |
Rotary sliding vane air compressor | 2.45% | Group II |
Typical Characteristics
Test Items | Typical data | Test Method |
Appearance | Yellow to brown liquid | Visual |
Kinematic Viscosity at 40℃, mm2/s | 93 | ASTM D445 |
Flash Point (PMCC) ℃ | >180 | ASTM D93 |
Density, g/cm3 | 0.993 | ASTM D4052 |
RPVOT (Finished fluid)，min | 1450 | ASTM D2272 |
FZG （Finished fluid） | 11 | ASTM D5182 |
Handling Information
Max Handling Temp: 80℃.
Shelf Life: 24 months at ambient temperature.
(1) L5101 does not contain antifoam and demulsifier additives. 75 ppm non-silicon defoaming agent and 100ppm demulsifier additive are recommended for finish fluid blending.
(2) Base oil quality is very important for air compressor oil.
